|3020 SQUARE FEET||5 BEDROOMS||3 FULL BATH||1 HALF BATH|
|2 FLOOR||50' 5" WIDTH||50' 10" DEPTH||2 GARAGE BAY|
This splendid and luxurious multi-unit duplex is truly an amazing house both inside out. This Contemporary style home is the perfect mix of comfort and convenience – complete with roomy RV-size garages that have 16-foot by 14-foot doors! The magnificent two-story floor plan has 3020 total square feet of heated and cooled living space.
Unit A has 1845 square feet of conditioned living space (426 sq. ft. down and 1419 sq. ft. up), 844 square feet of garage and storage space, and 242 square feet of deck area. It comes with 3 bedrooms, 2 full bathrooms, a half bath downstairs, and an open-floor-plan living area.
Unit B has 1175 square feet of conditioned living space (99 sq. ft. down and 1076 sq. ft. up), 1151 square feet of garage and storage space, and 242 square feet of deck area. It comes with 2 bedrooms, 2 full bathrooms, and an open-floor-plan living area.
Each plan set includes the following:
a) Floor Plans: Floor plan drawings indicating dimensions for construction
b) Roof Plan: Drawings indicating roof slopes and unique conditions
c) Exterior Elevations: Drawings showing appearance and the types of materials used for the exterior finish and trim
d) Building Sections: Drawings cut through important locations in the structure
e) Construction Details: Drawings showing specific construction of building elements at a large scale
f) Electrical Plans: Basic electrical layout (suggested locations of fixtures, switches, and outlets)
g) Foundation Plan: Dimensioned drawings describing specific foundation conditions for the structure
h) A building license: A single-use license for construction at one location only
Additional notes about engineering and building codes:
Our plans are designed to meet national building codes. We do not guarantee they will meet all local building requirements or building codes influenced by local geographic or climatic factors. It is the responsibility of the owner or builder to ensure these plans comply with city, county, municipal, and/or state/provincial building codes. Additionally, your plans will not be sealed or stamped by an engineer or architect. It is the owner’s (or builder’s) responsibility to hire a local professional to review and seal or stamp the plans if required by the building department. This must be handled by an engineer or architect licensed in the state/province where the plan is to be built.
Order a Cost-to-Build Report and get $100 off a plan priced $500 or more!
To get started, click the “Order a Cost-to-Build Report” button above; then on the next page, click “Order Now and Get $100 Coupon” for your promo code.